TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-1304005.png)
‹› The cables must be routed in provided recesses in heat shield - 3 -.
‹› The enlargement shows the heat shield from above.
-
Tighten heat shield - arrows -.
-
Install driveshaft => Rear Final Drive 39 Removal and Installation
-
Assemble exhaust system free of tension and attach tunnel brace - arrows - => Engine Mechanical 26 Description and Operation.
-
Tighten cable mounting bracket on transmission - arrows - => [ (Item 11) Bolt ] See: Service and Repair/Removal and Replacement/Shift Cable
and Selector Cable Assembly Overview.
