TT Quattro Coupe V6-3.2L (CBRA) (2008)
‹› Ignore bolt - 1 -.
-
To avoid vehicle alignment, secure subframe => Suspension,
Wheels, Steering 40 Description and Operation.
-
Remove subframe.
-
Remove right drive axle heat shield from bevel box - arrows -.
-
Remove right drive axle from flange shaft => Suspension,
Wheels, Steering 40 Removal and Installation.
-
Raise drive axle as far as possible and secure with wire without damaging surface coating.
-
Remove transmission carrier bolts - arrows - to bevel box and engine.