TT Quattro Coupe V6-3.2L (CBRA) (2008)
-
Fill area between sealing lip and dust lip halfway with sealing grease (G 052 128 A1).
-
Pull in output flange with two arm puller - A -.
A Two arm puller, e.g. (Kukko 20/10)
-
Position pulling hook on underside of drive pinion housing.
-
Coat threads of new hex head nut with locking compound (D 000 600).
-
Tighten new output flange hex head nut.
Tightening torque: 480 Nm