TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
NOTE: An erroneous entry can be corrected by pressing button -C-.
-
Press -Q- button to confirm input.
Indicated on display:
Channel 88 adaptation 0
->
<-1 3->
The selected channel and the respective system configuration is displayed in the upper line (0 = long wave activated, 1 = long wave off).
-
Press -> button.
Indicated on display:
Channel 88 adaptation 0
->
Enter adaptation value XXXXX
-
Enter new adaptation value (e.g. 00001), where 00001 = long wave off and 00000 = long wave activated.
-
Press -Q- button to confirm input.
Indicated on display:
Channel 88 adaptation 1
->
<-1 3->
-
Press -Q- button to confirm input.
Indicated on display:
Channel 88 adaptation 1
Q
Store modified value?
-
Press -Q- button to confirm input.
Indicated on display:
Channel 88 adaptation 1
->
Modified value has been stored
-
Press -> button.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -6-. This selects "End Output", function 06.
-
Press -> button.
Activating and deactivating transport mode
Indicated on display:
Adaptation
Enter channel number XX
-
Press buttons -9- and -9-. (99 selects "channel 99".)
NOTE: An erroneous entry can be corrected by pressing button -C-.
-
Press -Q- button to confirm input.
Indicated on display: