TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
Figure 10
11. Using needle nosed pliers, carefully pull spring in direction shown (Figure 10, white arrow) enough to clip spring on anchor (Figure 10, black
arrow).
Figure 11
12. Position spring (Figure 11, white arrow) behind side frame anchor (Figure 11, black arrow).
Figure 12
13. Secure spring to side frame (Figure 12).
Figure 13
14. Position guide pin in side frame channel (Figure 13).
15. Repeat procedure for opposite side, with exception of pivot arm assembly (only for right side).