TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
-
Remove inner screw - arrow - and pull off Coupe locating block - 1 -.
-
Place Roadster locating block - 2 - into drill and assembly fixture, and secure with inner screw.
-
Pull lid down and place drill and assembly fixture - 1 - on hatch and push forward to stops.
-
Turn knob - 2 - to pull fixture snug.
-
Close clamps - 3 -.
-
Continue turning knob - 2 - until it does not turn anymore.