TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
When installed the arrow on the brake pad backing plate - A - must point downward. Ensure this is installed correctly!
^
Fit outer brake pad to brake carrier.
^
Pull protective foil off outer brake pad backing plate.
^
Secure brake caliper housing with both guide pins - arrows - to brake carrier. Fit both protective caps.
^
Insert retaining spring into brake caliper housing.
Notes: After replacing the brake pads, depress pedal firmly several times with the vehicle stationary, so that the brake pads are properly seated in
their normal operating position.
^
Check brake fluid level.