TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
Air Door Actuator / Motor: Service and Repair
Temperature Regulator Flap Motor -V68-, Removing and Installing
Temperature Regulator Flap Motor -V68-, Removing And Installing
-
Remove footwell vent.
-
Disconnect electrical connection -A-.
-
Remove bolts -B- (3x).
-
Disengage actuating arm -C- and remove motor.
NOTE:
-
After installing, always carry out On Board Diagnostic (OBD) on Climate control. See: Testing and Inspection/Initial Inspection and Diagnostic
Overview/Scan Tool Connecting and Initial Checks
-
When installing motor, make sure actuating arm -C- is properly aligned and installed.
-
Route electrical wiring harness so that it cannot come into contact with any moving parts like the actuating arm on the motor or other.