TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
Heater Core: Locations
Mechanical Components
Heating And A/C Unit (With Heater Core And Evaporator) Mechanical Components, Overview
1
-
Heater core
2
-
Seal
-
Seals heater core from engine compartment.
3
-
Mounting flange
4
-
Screw
5
-
Evaporator housing seal
-
Always replace
-
Seals refrigerant pipes from engine compartment. Refer to Fig. 3.
6
-
Defroster duct
7
-
Tensioning strap
-
Must be installed correctly Refer to Fig. 1 .
8
-
Climate control system wiring harness
-
When installing, ensure proper clearance to moving parts Refer to Fig. 2 .
9
-
Kick panel
-
Secured with tensioning strap and screw clips.
10
-
Screw clip
11
-
Footwell duct/vent
12
-
Heating and A/C unit
-
With electrical components
Fig. 1 Tensioning strap, installing
NOTE:
-
Ensure tensioning strap -A- is installed and located in the correct positions around the housing.