audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Turn Signals > < How to Find Wiring Diagrams|Page 11595
Page 1
background image

Trunk Lamp: Service and Repair

CAUTION:  Before beginning repairs on the electrical system:

-

Obtain the anti-theft radio security code.

-

Switch the ignition off.

-

Disconnect the battery Ground (GND) strap.

-

After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according
to Owner's Manual.

Luggage Compartment Lights, Removing And Installing

NOTE:

-

The luggage compartment lights must be removed in order to change a bulb.

-

Bulb for luggage compartment light: 12 V, 5 W.

-

One light is installed in the rear lid trim and one in the left side trim in the luggage compartment.

Luggage compartment light in rear lid trim, removing

-

Using a flat-tipped screwdriver, pry luggage compartment light -arrow- out of trim.

-

Disconnect electrical connection.

-

Remove bulb from holder.

Installing

-

Connect electrical connection.

-

Insert luggage compartment light into opening and clip in on the opposite side -arrow-.

Luggage compartment light in luggage compartment side/front trim, removing

-

Using a flat-tipped screwdriver, pry luggage compartment light -arrow- out of trim.

-

Disconnect electrical connection.

-

Remove bulb from holder.

Installing

-

Connect electrical connection.

-

Insert luggage compartment light into opening and clip in on the opposite side -arrow-.

Turn Signals > < How to Find Wiring Diagrams|Page 11595