TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
-
Connect multimeter between terminal 1 and 4 for resistance measurement.
-
Specification: Infinity Ohms (no continuity)
-
Depress accelerator pedal.
-
Specification: approx. 0 ohms
-
Connect multimeter between terminal 2 and 3 for resistance measurement.
-
Specification: approx. 0 ohms
-
Depress accelerator pedal.
-
Specification: Infinity ohms (no continuity)
If specified values are not obtained:
-
Replace brake light switch / brake pedal switch.
If specified values are obtained:
Checking voltage supply
-
Connect VAG1527B voltage tester as follows:
Harness connector
Measure to
Terminal
1
Chassis Ground (GND)
-
LED must light up.
Harness connector
Measure to
Terminal
2
Chassis Ground (GND)
-
Switch ignition on.
-
LED must light up.
If LED does not light up: