TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
3
-
Lower spacers (2x)
-
Glue lower spacers onto window flange at a distance a = 230 mm from bracket for third brake light flush with inside edge on left and right.
4
-
Stopper profile for adhesive
-
Stopper profile should be made from two pieces to form a total length of 670 mm
-
Stopper profile for adhesive prevents primer/adhesive from coming into contact with conductor strip
-
Glueing on Fig. 1
Fig. 1 Glueing on guard strip for adhesive
-
Make two stopper profiles - 2 - with length - C - of 670 mm out of three replacement parts.
-
Starting at arrow - A - and working upward, stick stopper profile onto rear window - 1 - at edge of conductor strip.
-
Connection for antenna - 3 -.