TT Quattro Roadster V6-3.2L (BHE) (2005)
Exterior Moulding / Trim: Service and Repair
Edge Molding, Removing and Installing
Edge Molding, Removing And Installing
NOTE: Side window does not have to be removed to remove edge molding.
1
-
Pop rivets (11x)
2
-
Edge molding
-
B-pillar trim removed
-
Door seals in vicinity of roof edge molding detached
-
Drill out heads of pop rivets - 3 - and knock out rivet shanks.
-
Carefully pry edge molding out of securing clips - 3 - (3x) and remove.
CAUTION: Do not bend or twist roof edge molding, otherwise it will be visibly damaged.
3
-
Securing clips
-
Qty. 3