TT Quattro Roadster V6-3.2L (BHE) (2005)
/Page-2379002.png)
-
Remove Torx socket head bolt for noise insulation panel - left arrow -.
-
For vehicles with 165 kW engine (code: APX), remove rubber mounting at front exhaust pipe.
-
Remove rear bolts - 1 -.
-
By loosening front bolts - 2 - lower subframe far enough until bushings are accessible.
-
Position splitter tool Kukkol5-1 with Kukkol7-1, and remove upper half of bushing.
-
Insert thrust pad VW447 h.
-
Using engine/transmission jack and base block VW441, push subframe upward until lower half of bushing drops out.