TT Quattro Roadster V6-3.2L (BHE) (2005)
/Page-2449001.png)
Door Lock Cylinder: Service and Repair
Lock Cylinder Housing, Removing
-
Pull door handle - 1 - and hold.
-
Unscrew bolt - 3 - onto stop with socket insert T 10011. This releases the lock cylinder housing.
NOTE: Unscrewing the bolt too far may result in the locking ring becoming detached from the bearing bracket and falling into the door.
-
Pull lock cylinder housing - 2 - out of door handle bearing bracket at right angles.
