TT Quattro Roadster V6-3.2L (BHE) (2005)
/Page-1295001.png)
Acceleration/Deceleration Sensor: Removal and Replacement
Longitudinal Acceleration Sensor, through 08.01, Removing and Installing
Removing
-
Remove glove box
-
Unplug electrical connector -2-.
-
Use a screwdriver to pry mount off longitudinal acceleration sensor - arrows - and remove Longitudinal acceleration sensor G251 -1-.
Note:
^
The longitudinal acceleration sensor is not resistant to shocks or impact.
^
Do not install a sensor which has dropped to the ground otherwise proper operation is not ensured.
Installing
Install in reverse sequence; note the following points:
-
Initiate basic setting for longitudinal acceleration Longitudinal acceleration sensor G251.
-
Perform ESP road test. See: Description and Operation/General Information
