TT Quattro Roadster V6-3.2L (BHE) (2005)
5 - Sealing plug
^ Moisten with brake fluid and press into brake master cylinder
^ Press brake fluid reservoir into sealing plugs.
6 - Retaining pin
^ For brake fluid reservoir
7 - Brake master cylinder
8 - Mounting plate
^ Different versions available
9 - Nut - 4 Nm
^ Self-locking
^ Replacing each time after removing
10 - Heat shield
11 - Brake Pressure Sensor 2 G214
12 - Brake Pressure Sensor 1 G201
13 - Seal
^ Always replace
14 - Electrical connector
15 - Electrical wire
16 - Vacuum line
^ With non-return valve
17 - Sealing plug
18 - Gasket
^ For brake booster
19 - Nut - 28 Nm
^ Self-locking
^ Replacing each time after removing
20 - Boot
^ If unusually loud suction noise is heard on braking, check proper positioning of inner boot.