TT Quattro Roadster V6-3.2L (BHE) (2005)
9 - Oil pressure switch -F1-, 1.4 bar
^
Black insulation
^
Tighten to 25 Nm
10 - Oil seals
^
Replace
11 - Sealing cap
^
Tighten to 25 Nm
12 - Oil seal
^
Replace
^
Lubricate before installing
13 - Oil cooler
^
Ensure clearance from adjacent components
^
Diagram of coolant hose connections
^
Read note if making repairs on engine
14 - Oil seal
^
Lubricate before installing
^
Press onto oil cooler with plastic element item -15-
15 - Plastic element
^
Insert into oil cooler together with oil seal item -14-
Installed position of oil seal and plastic element in oil cooler
-
Insert oil seal (coat with oil) into oil cooler.
-
Insert plastic element into oil cooler.
^
Side of plastic element without support must align with lug (arrow) of oil cooler.