TT Quattro Roadster V6-3.2L (BHE) (2005)
/Page-631007.png)
-
Unscrew bolt (arrow) for air conditioning compressor.
Note:
The air conditioning compressor can only be removed from the bracket with the upper securing bolt still inserted. To do so, press the engine
simultaneously to the left side with an assembly lever (2nd technician required). If required, loosen all bolts of the assembly mounting 1 turn.
-
Tie up air conditioning compressor together with refrigerant hoses at front of longitudinal member (refrigerant hoses remain connected).
-
Remove lower securing bolt -1- for Generator.
-
Remove Generator from bracket for ancillary units (electrical wires remain connected).
-
Unscrew clamp -3-.
-
Unscrew wire -1- at Generator.
-
Disconnect electrical connector -2-.
-
Remove Generator.
-
Remove connector (arrow) for Engine speed (RPM) sensor -G28- from retainer on oil dipstick guide tube.
