TT Quattro Roadster V6-3.2L (BHE) (2005)
/Page-632007.png)
-
Remove clamp -3-.
-
Remove wire connection -1- at Generator.
-
Disconnect electrical connector -2-.
-
Remove Generator.
-
Remove bolt -3- and pull out guide tube for oil dipstick -2-.
-
Remove bolt -4- and unfasten vacuum reservoir -1-from manifold.
-
Move vacuum reservoir to side (hoses remain attached).
-
Remove bolt (arrow) at coolant pump bracket for After-Run coolant pump -V51-.
-
Remove bolts -1 to 5- and remove bracket for ancillary units.
