TT Quattro Roadster V6-3.2L (BHE) (2005)
-
Unscrew 7 nuts (arrows) on both exhaust manifolds and remove together with washers.
-
Pull exhaust manifolds to rear and remove.
Installing
Installation is performed in the reverse order. Note the following:
NOTE: Replace gaskets and self-locking nuts.
-
Install intake manifold.
Tightening torques
Components
Nm
Exhaust manifold to cylinder head
23 Nm 1)
Front exhaust pipe to exhaust manifold
40 Nm 1)
1) Replace nuts