TT Quattro Roadster V6-3.2L (BHE) (2005)
-
Remove front heat shield (arrows).
-
Unbolt front exhaust pipe from exhaust manifolds (arrows).
-
Remove front exhaust pipe.
Installing
Installation is performed in the reverse order. Note the following:
NOTE: Replace gaskets and self-locking nuts.
-
Install front section of driveshaft.
-
Install body brace.
-
Align exhaust system free of stress.
Tightening torques
Components
Nm
Front exhaust pipe to exhaust manifold
40 Nm 1)
Catalytic converter to front exhaust pipe
23 Nm 1)
Oxygen sensor in front exhaust pipe
55 Nm
Pendulum support to subframe
20 Nm + 90 degrees 1) 2)
1) Replace nuts and bolts
2) 90 degrees equals one quarter turn