TT Quattro Roadster V6-3.2L (BHE) (2005)
Fuse Block: Service and Repair
Fuse Panel, Removing and Installing
Fuse Panel, Removing And Installing
CAUTION:
Before beginning repairs on the electrical system:
-
Obtain the anti-theft radio security code.
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Disconnect negative ( - ) battery terminal.
-
When reconnecting battery terminals, observe all applicable Notes and torque specifications, as well as instructions on performing OBD
program and electrical system function checks as specified.
Removing
NOTE: All removed cable ties are to be replaced and attached in original location.
-
Disconnect battery.
-
Remove driver's lower instrument panel trim
-
Remove screws -B-.
-
Release clips -C- and push fuse panel behind and below instrument panel.
-
Cut cable tie -1-.
-
Release cover -arrows-.
-
Remove fuses.