audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Stabilizer Bar, Removing and Installing|Page 5865 > < Stabilizer Bar, Removing and Installing|Page 5863
Page 3
background image

-

Install new clamps so that the ends of the bolts do not protrude beyond the bottom of the clamp. (The illustration shows the clamp looking from
front to rear.) Tightening torque of bolts: 40 Nm.

180 HP version 

-

Install new clamps so that the ends of the bolts do not protrude beyond the bottom of the clamp. (The illustration shows the clamp looking from
front to rear.) Tightening torque of bolts: 40 Nm.

Stabilizer Bar, Removing and Installing|Page 5865 > < Stabilizer Bar, Removing and Installing|Page 5863