TT Roadster L4-1.8L Turbo (AWP) (2003)
/Page-4242003.png)
Figure 6
6. Position spring on square boss as shown (Figure 6, white arrow).
7. Make sure spring ends are as shown (Figure 6, black arrows).
Figure 7
8. Install side frame in cover.
Side frames are marked "L" for left side and "R" for right side.
Figure 8
9. Position spring coil (Figure 8, white arrow) behind side frame anchor (Figure 8, black arrow).
Figure 9
10. Position spring end (Figure 9) on side frame as shown.
