TT Roadster L4-1.8L Turbo (AWP) (2003)
Hood Latch Release Cable: Service and Repair
Hood Lock Cable, Removing And Installing
1
-
Hood lock cable
Removing:
-
Remove compartment on driver's side.
-
Unscrew bolts - 3 -.
-
Detach cable at support -arrow B- and disengage end of cable -arrow A- at lower section of hood lock - 3 -.
-
Pull off securing clips - 2 -.
-
Disengage hood lock cable from holder - 4 -.
-
Pull through cable - 1 - toward passenger compartment.
Installing:
-
Install in reverse order.