TT Roadster L4-1.8L Turbo (AWP) (2003)
3
-
Pop rivet
-
To remove, drill off rivet head and knock rivet shaft through.
4
-
Cover
-
Unclip
5
-
Combination bolt
-
12 Nm
6
-
Striker
-
Adjusting:
-
Tighten combination bolts - 5 - finger-tight (striker plate must remain movable).
-
Carefully close rear lid until lid is flush with rear side panels.
-
Carefully open lid and tighten combination bolts.
7
-
Lid hinge