TT Roadster L4-1.8L Turbo (AWP) (2003)
/Page-4520005.png)
-
Remove tensioning strap - 1 - glued to side of front roof rail.
-
Tensioning cable nipple - 2 -.
CAUTION:
There are adjustment spacers between the convertible top frame and the retaining tracks for lateral adjustment of the seal retaining
tracks.
Note the number and thickness of the adjustment spacers before removing retaining tracks.
The same number and thickness of spacers must be used during installation of the retaining tracks.
-
Bring convertible top into halfway opened position and remove the uppermost bolt (top arrow) for securing the retaining tracks.
-
Remove spacers - 2 - and note the number and thickness.
-
Close convertible top.
-
Unscrew the remaining two bolts (center and lower arrow) for securing the retaining tracks and remove together with seal.
-
Remove spacers and note the number and thickness.
