TT Roadster L4-1.8L Turbo (AWP) (2003)
Water Pump: Service and Repair
Coolant Pump, Removing and Installing
Note: Always replace seals and gaskets.
Removing
-
Remove engine cover.
-
Disconnect air duct at bottom of right - hand longitudinal member (air duct leads to charge air cooler).
-
Drain coolant system. See: Service and Repair
-
Remove center and right - hand sections of noise insulation -arrows-.
-
Remove ribbed belt and tensioning element. See: Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair
-
Disconnect vacuum hose from activated charcoal filter and from throttle valve connection.