TT Roadster L4-1.8L Turbo (AWP) (2003)
Cabin Air Filter: Service and Repair
Dust And Pollen Filter, Removing And Installing
-
Lift air intake plenum cover section -A-.
-
Push back tabs -B-.
-
Remove dust and pollen filter element from housing.
NOTE:
-
To prevent water from running onto dust and pollen filter and into the heating system, the air intake plenum cover and wind deflector must be
properly installed.
-
Air intake plenum cover section -A- must not contact dust and pollen filter.
-
Dust and pollen filter element should be replaced at regular intervals.
-
Dust and pollen filter must be re-installed correctly in frame -B-. Arrows -A- marked on frame indicate air flow direction through filter element.