TT Roadster L4-1.8L Turbo (AWP) (2003)
Display on VAS 5051:
-
Check readouts in display zones -1- to -4-.
The display shows the control modules which are equipped with a CAN interface for data transfer with the engine control module.
-
No display: control module not equipped with CAN interface
-
Display 1: control module with CAN interface forms part of the CAN bus
-
Display 0: control module with CAN interface does not form part of the CAN-bus
-
Press the [up arrow] button to advance to Display group 126.
-
Check readouts in Display group 126 in the same way.
-
Press the <- button to exit from the function "08 - Read data block".
Display on VAS 5051:
-
Select the diagnosis function "06 - End output" from the menu -1-.
Display on VAS 5051:
-
Select the diagnosis function "00 - Check all fault memories" from the menu -1-.
-
The Diagnostic Trouble Code (DTC) memory of all on-board systems with self-diagnostic capability will be read.
When a control module answers with its identification the number of stored DTCs appears on the display or "No fault recognized".