TT Roadster L4-1.8L Turbo (AWP) (2003)
Side Air Bag: Service and Repair
Protective Tube, Installing on Side Airbag Cable
Protective Tube, Installing On Side Airbag Cable
NOTE: When installing a side airbag unit without protective tube -B-, retrofit module with a protective tube.
-
Slide protective tube -B- onto side airbag cable at side airbag unit -5- until stop. Marking -1- must be located at connector -4-.
-
Unfold and secure protective tube -B- using adhesive strips -A-.
-
Remove white foil from chafe protection strip -C- and adhere chafe protection strip between markings -2- and -3-.
-
Remove yellow foil and wrap around protective tube.