TT Roadster L4-1.8L Turbo (AWP) (2003)
/Page-2641002.png)
-
Unscrew ATF drain plug -B- and drain ATF.
-
Unscrew ATF inspection plug -A-.
-
Unscrew overflow pipe -C- (Allen key, size 5) and allow remaining ATF to drain away.
-
Loosen 8 bolts of oil pan (arrows) in a diagonal sequence.
Note: There is still ATF in the oil pan, because not all of it can drain away via the aperture -A-.
-
Remove oil pan with oil pan gasket.
Installing
Installation is performed in the reverse order; note the following:
-
Clean two magnets in flanges of oil pan. Watch for full contact of magnets with oil pan.
Note: The magnets must always be installed at the intended locations in the oil pan.
-
Clean seal and sealing surfaces and remove oil residue.
-
Make sure oil pan gasket is correctly positioned.
Note: No wiring must be pinched when the oil pan is installed.
