TT Roadster L4-1.8L Turbo (AWP) (2003)
8 -
Floor panel/body
9 -
Mount
10 -
Bolt, 23 Nm
11 -
Bolt, 13 Nm
^
For setting shift mechanism
12 -
Lever
^
For selector shaft
13 -
Support bracket
^
For selector lever cable to transmission
14 -
Bolt, 23 Nm
^
For support bracket
^
2 off
15 -
Nut, 13 Nm
^
For bracket - Item 16- to transmission
16 -
Bracket
^
With clip for selector lever cable
Disassembling and assembling sequence
-
Check whether a coded radio is installed. If so, obtain anti-theft code.
-
Shift selector lever into position "D".
-
With ignition switched off disconnect battery Ground strap.
-
Remove selector lever handle.
-
Remove rear center console.