TT Roadster L4-1.8L Turbo (AWP) (2003)
/Page-2736003.png)
-
Disconnect connector - 1 - of printed circuit board.
-
Remove connector from hole (arrow) in bracket - 2 -.
-
Disconnect connector (arrow) for shift lock solenoid.
-
At four hooks (arrows) carefully bend frame outward with a screwdriver and remove together with retaining ring, printed circuit board and cover
-A-.
-
Move selector lever to position "P".
-
Disengage locking cable - 1 - from locking lever at shift mechanism.
-
Unscrew 2 nuts for front shift mechanism mounting (arrows).
