TT Roadster L4-1.8L Turbo (AWP) (2003)
Wiring Harness: Service and Repair
Oil Pan / ATF Screen / Valve Body and Internal Wiring Harnesses, Component Overview
Oil pan / ATF screen / valve body and internal wiring harnesses, removing and installing, 09G, 6 Speed A/T
CAUTION! Do not run engine or tow vehicle with oil pan removed or when there is no ATF in the transmission.
Note:
^
Always replace valve body if it has collected dirt or if it is faulty.
^
Rules for cleanliness when working on the automatic transmission.
^
General repair instructions.
^
Lightly lubricate O-rings and sealing rings with ATF. Other types of lubricant can cause problems with the hydraulic actuation of the transmission.
^
The valve body and wiring harnesses with 8-pin and 14-pin connectors can also be removed with the transmission installed.
Oil pan / ATF screen / valve body and internal wiring harnesses, component overview
1 -
ATF inspection plug, M10, 27 Nm
^
Always replace seal Item - 2 -
2 -
Sealing ring
^
Always replace
3 -
Overflow pipe, 1 Nm
^
Threaded into oil pan with Allen key, size 5
4 -
Oil pan
5 -
M6 bolt, 7 Nm
^
Qty. 8
^
For securing oil pan with oil pan seal at transmission housing
6 -
Seal