TT Roadster L4-1.8L Turbo (AWP) (2003)
-
Pull off supply hose - A - to brake fluid reservoir and close off the end.
-
Pull clip - B - for pipe/hose assembly out of master cylinder.
-
Pull pipe/hose assembly - C - out of master cylinder and close off end of pipe/hose assembly.
-
Remove driver's side lower cover.
Unbolt clutch pedal mounting bracket (complete) as follows:
-
Remove securing nuts (arrows 1) and take off connecting plate (arrow - A -).
-
Remove securing nuts (arrows 2) for mounting bracket - B -.
-
Take off mounting bracket.
-
Separate master cylinder operating rod from clutch pedal as follows:
-
Insert release tool 3309 in the clutch pedal cut - outs (arrow A). The inscription "top/oben" (B) points away from clutch pedal.