TT Roadster L4-1.8L Turbo (AWP) (2003)
Throttle Position Sensor/Switch: Service and Repair
Tiptronic switch - F189 -, removing and installing, 09G, 6 Speed A/T
In order to replace the Tiptronic switch, the circuit board (Item - 7 -) must be replaced.
Removing
-
Check whether a coded radio is installed. If so, obtain anti-theft code.
-
Shift selector lever into position "D".
-
With ignition switched off disconnect battery Ground strap.
-
Remove selector lever handle.
-
Remove rear center console.
-
Disconnect connector - 1 - of printed circuit board.
-
Remove connector from hole (arrow) in bracket - 2 -.
-
At four hooks (arrows) carefully bend frame outward with a screwdriver and remove together with retaining ring, printed circuit board and cover
-A-.
-
Remove screws (arrows).
-
Remove retaining ring together with top cover and disconnect side cover from frame.