TT Roadster L4-1.8L Turbo (AWP) (2003)
Transmission Speed Sensor: Service and Repair
Sender For Transmission Output RPM - G195-, Removing and Installing
Sender for transmission output RPM - G195 -, removing and installing, 09G, 6 Speed A/T
Note:
^
Be familiar with the rules for cleanliness when working on the automatic transmission.
^
General repair instructions.
Removing
-
Disconnect battery.
-
Remove oil pan.
-
Remove ATF screen.
-
Remove valve body.
-
Remove bolt - 2 -.
-
Remove sender - G195 - with wire -B- from transmission.
Installation is performed in the reverse order; note the following:
-
Coat O-ring on sender with ATF.
-
Press sender - G195 - carefully up to limit stop in transmission.
-
Tighten M5 bolt to 6.5 Nm.