TT Roadster L4-1.8L Turbo (AWP) (2003)
Windshield: Removal and Replacement
Gasket, Removing and Installing
Gasket, Removing And Installing
-
Remove windshield.
-
Use metal scraper to detach gasket from windshield glass and remove.
-
Use cleaning fluid D 009 401 04 to clean bonding surface of windshield - 1 -.
-
Apply primer D 009 200 02 with cotton swab - 2 -.
-
Drying time: 10 minutes.
Preparing new gasket
-
Clean clamping channel - 3 - of gasket - 1 - with cotton swab - 2 - and cleaning solution D 009 401 04.
-
Apply plastic primer D 009 600 to clamping channel with cotton swab.
-
Drying time: 10 minutes
-
Use thin nozzle - 3 - to apply adhesive sealant - 2 - (3 mm thick) to clamping channel - 1 -.
-
Center gasket with glass pane, and press onto bottom edge of pane.
CAUTION: Allow 4 hours for adhesive sealant to set before pressing plenum chamber cover into gasket.