TT Roadster L4-2.0L Turbo (BPY) (2008)
Garage Door Opener Control Head: Service and Repair
Garage Door Opener Control Head
Garage Door Opener Control Head
Removing
Special tools, testers and auxiliary items required
‹› Trim Removal Wedge (3409)
Removing
-
Remove front interior/reading light, refer to => [ Front Interior Lamp/Reading Lamp ] See: Lighting and Horns/Courtesy Lamp/Service and
Repair/Front Interior Lamp/Reading Lamp.
-
Carefully pry the diffusion lens - 1 - out of the socket - 2 - - arrow - using the Trim Removal Wedge (3409).
-
Release the retaining clips - 3 - with a small screwdriver - arrows - and tilt the Garage Door Opener Control Module (E284) - item 1 - out of the
interior/reading lamp - 2 -.
Installing
Install in reverse order of removal, observing the following:
-
Press the interior/reading lamp lens on until it engages.