TT Roadster L4-2.0L Turbo (BPY) (2008)
Radio Receiver: Diagrams
Digital Sound System Control Module J525 - Standard, Multi-Pin Connector Assignments
Digital Sound System Control Module J525 - Standard, Multi-pin Connector Assignments
NOTE: Unlisted connector terminals are not assigned.
A -
Black 32-pin multi-pin harness connector (T32a)
1
-
Terminal 30
2
-
Terminal 31
3
-
Loudspeaker, left front (-)
4
-
Loudspeaker, left front (+)
6
-
Loudspeaker, left rear (+)
7
-
Loudspeaker, left rear (-)
11
-
CAN-Bus Low (Infotainment)
12
-
CAN-Bus High (Infotainment)
14
-
Positive switched from Radio R / Navigation System with CD Drive Control Module J401 / Radio/Navigation Display Control Module J503
15
-
Loudspeaker, right front (-)
16
-
Loudspeaker, right front (+)
18
-
Loudspeaker, right rear (-)
19
-
Loudspeaker, right rear (+)
20
-
Center Mid/High Range Speaker R158 (-)
21
-
Center Mid/High Range Speaker R158 (+)
24
-
Left rear signal (-) from Radio R / Navigation System with CD Drive Control Module J401 / Radio/Navigation Display Control Module J503
25
-
Left rear signal (+) from Radio R / Navigation System with CD Drive Control Module J401 / Radio/Navigation Display Control Module J503
26
-
Left front signal (-) from Radio R / Navigation System with CD Drive Control ModuleJ401 / Radio/Navigation Display Control Module J503
27
-
Left front signal (+) from Radio R / Navigation System with CD Drive Control Module J401 / Radio/Navigation Display Control Module J503
29
-
Right rear signal (-) from Radio R / Navigation System with CD Drive Control Module J401 / Radio/Navigation Display Control Module J503
30
-
Right rear signal (+) from Radio R / Navigation System with CD Drive Control Module J401 / Radio/Navigation Display Control Module J503
31
-
Right front signal (-) from Radio R / Navigation System with CD Drive Control Module J401 / Radio/Navigation Display Control Module
J503
32
-
Right front signal (+) from Radio R / Navigation System with CD Drive Control Module J401 / Radio/Navigation Display Control Module
J503