TT Roadster L4-2.0L Turbo (BPY) (2008)
Steering Mounted Controls Communication Module: Service and Repair
Steering Column Electronic Systems Control Module
Steering Column Electronic Systems Control Module J527, Removing And Installing
-
If control module is replaced, select "Replacement" function for appropriate control module in "Guided Fault-Finding" routine.
Use the Vehicle Diagnosis, Testing and Information System VAS 5051 to do so.
Removing
-
Disconnect battery ground wire.
-
Observe airbag system safety precautions.
-
Remove steering column switch module.
-
Remove bolt - arrow - (2 Nm) below spiral spring.
The Steering Column Electronic Systems Control Module J527 is secure to steering column module with two spring retainers.
-
Release springs - 1 - and - 2 - with a small screwdriver.
-
Remove Steering Column Electronic Systems Control Module J527 downward from steering column module.
Installing
-
Observe airbag system safety precautions.
-
Install in reverse order.
-
Ensure all connections have engaged and lines lie in proper guides.