TT Roadster L4-2.0L Turbo (BPY) (2008)
Front Door Panel: Service and Repair
Pull Handle
Pull Handle
Removing
‹› Removal and installation are same for right and left.
-
Remove door trim.
-
Remove insulation from door trim.
-
Remove armrest bolts - arrows -.
-
Remove pull handle screws - 1 - and - 2 -.
-
Pull armrest - 2 - away from door trim slightly in pull handle area - arrow A -.
-
Disengage bottom of pull handle - 1 - from guide and top from door trim - arrow B -.
-
Remove pull handle upward from armrest guide.
Installation
Installation is reverse of removal, but note the following:
-
Make sure the top and bottom of pull handle engages in guides.