TT Roadster L4-2.0L Turbo (BPY) (2008)
7
Securing Clip with Seal
‹› For door trim
CAUTION!
‹› For proper crash sensor (pressure sensor) function, ensure door does not leak.
‹› The door trim sealing clips seal the system. Replace door trim sealing clips if necessary.
‹› Follow safety measures when working with front side airbag crash sensors (pressure sensors) => [ Front Side Airbag Crash Sensors
Safety Precautions ] See: Restraint Systems/Air Bag Systems/Impact Sensor/Service Precautions.
8
Passenger Compartment Monitoring Switch (E183 )/Alarm System -Off- Switch (E217)
9
Bolt
‹› For armrest
‹› Tightening specification - 1.3 Nm
10
Insulation
11
Bolt
‹› For pull handle
‹› Tightening specification - 3.3 Nm
12
Bolt
‹› For inside door release mechanism
‹› Tightening specification - 1.3 Nm
13
Door Trim
‹› Removing and Installing, refer to => [ Door Trim ] See: Doors/Front Door/Front Door Panel/Service and Repair/Door Trim
14
Interior Door Mechanism
‹› Removing and Installing, refer to => [ Inside Door Release Mechanism ] See: Doors/Front Door/Front Door Panel/Service and Repair/Door
Trim
15
Driver's Interior Locking Switch (E150) (central locking switch)
16
Bolt
‹› For door trim
‹› Tightening specification - 2.8 Nm
17
Mid-Range Speaker Trim
‹› Removing and Installing, refer to => [ Midrange Speaker Trim ] See: Doors/Front Door/Front Door Panel/Service and Repair/Door Trim
18
Pull Handle Trim
‹› Depending on version
‹› Removing and Installing, refer to => [ Pull Handle Trim ] See: Doors/Front Door/Front Door Panel/Service and Repair/Door Trim
19
Switch Mount
‹› For mirror adjustment switch