TT Roadster L4-2.0L Turbo (BPY) (2008)
Trunk / Liftgate Shock / Support: Removal and Replacement
Rear Lid Gas-Filled Strut, Roadster
Rear Lid Gas-Filled Strut, Roadster
Removing
‹› When removing and installing the gas-filled strut, push back the opened rear lid - 3 - only slightly so as to avoid damaging components.
-
Press back retaining clips - 4 - at ends of gas-filled struts - 1 - with a screwdriver and remove gas-filled strut from ball stud - 2 -.
Installing
‹› After completely removing gas-filled strut, ensure correct position when installing.
‹› Tube of gas-filled strut must be engaged on body side
-
Press gas-filled strut onto ball stud, first at bottom and then at top.