TT Roadster L4-2.0L Turbo (BPY) (2008)
/Page-2407001.png)
Trunk / Liftgate Stop: Service and Repair
Rear Lid Stop Buffer Adjustment, Roadster
-
Close rear lid.
‹› If lid is adjusted correctly, stop buffers must lightly contact body when rear lid is closed.
-
The replacement buffers are pre-adjusted and are moved out or in only when needed.
-
Check gap dimensions => [ Gap Dimensions ] See: Adjustments.
‹› To remove stop buffer, drill out rivet head - 1 -, drive out rivet shaft and remove buffer.
