TT Roadster L4-2.0L Turbo (BPY) (2008)
Front Subframe: Adjustments
Subframe Mount Adjustment, Checking
Subframe Mount Adjustment, Checking
Work procedure
-
Pull EVAP canister with connected lines upward in direction of - arrow - out of retainer and lay it aside.
Proceed as follows:
-
Check dimensions on right mount for engine and transmission:
^
Both bolt heads - 2 - must be parallel to edge of engine mount support arm - 3 -.
^
A distance of - x - = 16 mm must be present between engine mount - 1 - and engine support - 4 -.
Note:
^
Distance - x - = 16 mm can also be checked with corresponding round stock.
-
If distance is too small or too large, subframe mount must be adjusted.