TT Roadster L4-2.0L Turbo (BPY) (2008)
-
Remove bolts - 2 through 4 - on left and right support and remove intermediate plate - 1 -.
-
Roadster: remove the screws - arrows A - and - arrows B - and disconnect the tunnel support reinforcement - 1 - from the left support - 2 - and
from the front part of the tunnel - 3 -.
-
Remove Headlamp Range Control Module (J431), electrical connector must not be loosened. See: Lighting and Horns/Headlamp
-
Leave Head Range Control Module (J431) with electrical lines connected in vehicle.
-
Remove bolt - arrow - and remove air duct - 1 -.