TT Roadster L4-2.0L Turbo (BPY) (2008)
Power Seat Motor: Service and Repair
Front Seat Angle Adjustment Motors
Front Seat Angle Adjustment Motors
Removing
CAUTION!
‹› Observe safety precautions for work on airbags. Refer to => [ Airbag Safety Precautions ] See: Restraint Systems/Air Bag
Systems/Air Bag/Service Precautions.
‹› Before handling airbag units (e.g. disconnecting electrical connector), the person handling it must "discharge static electricity". This
can be done by touching door striker, for example.
-
Remove the seat. See: Service and Repair/Removal and Replacement/Front Power Seats/Front Seat
-
Attach front seat to Fixture For Seat Repair ( VAS 6136). Refer to => [ Front Seat, Installing on Fixture for Seat Repair VAS 6136 ] See: Service
and Repair/Removal and Replacement/Seat Versions Overview.
-
Remove bolts - 2 - (quantity: 4).
-
Remove the bolt - 3 -.
-
Remove connector - 4 -.
-
Remove Driver Seat Inclination Adjustment Motor ( V243) or (V244) - 1 -.
Installation
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
CAUTION!
‹› Observe safety precautions for work on airbags. Refer to => [ Airbag Safety Precautions ] See: Restraint Systems/Air Bag
Systems/Air Bag/Service Precautions.
‹› Before handling airbag units (e.g. disconnecting electrical connector), the person handling it must "discharge static electricity". This
can be done by touching door striker, for example.